Li Jie, Qiu Yafeng, Qian Yunsheng, Qian Xin. Design and research of glass fiber making system based on MCP[J]. Journal of Applied Optics, 2018, 39(1): 112-116. DOI: 10.5768/JAO201839.0105001
Citation: Li Jie, Qiu Yafeng, Qian Yunsheng, Qian Xin. Design and research of glass fiber making system based on MCP[J]. Journal of Applied Optics, 2018, 39(1): 112-116. DOI: 10.5768/JAO201839.0105001

Design and research of glass fiber making system based on MCP

  • In order to meet the needs of making microchannel plate(MCP), a high-precision glass fiber production system was designed. For ensuring the test accuracy which caused by the servo motor vibration at working station within the allowable range, the three-dimensional model of the glass fiber production system was established by UG software, and the vibration modal finite element simulation analysis was carried out by finite element analysis software, so as to assure the reliability of the system.Experiments of glass fiber drawing were carried out after the system was completed.Experiments show that design fully meets the glass fiber accuracy required for making MCP needed, and it is find out that the best operating temperature and drawing speed of the system under the technical index are 751℃ and 4 m/min, respectively.
  • loading

Catalog

    Turn off MathJax
    Article Contents

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return